PDA

Просмотр полной версии : Проблемы с компьютером


Curt
28.11.2006, 14:57
При запуске компьютера дело доходит загрузки windows потом идет перезагрузка пробовал пере устанавливать ос пишет что произошла не предвиденая ошибка

Sancho_1990
08.12.2006, 11:22
Всем привет,помогите плиз, у меня чсто перезагружается комп, точнее он виснит, и появляется "синий экран смерти" на котором написано:

A problem has been detected and windows has been shut down prevent damage to you computer
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps.
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask you hardware or software manufacturer for any windows updates might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS mempry to use safe mode to remove or disable components, restart your computer, press F8 to select Advaced Startup Options, and then select Safe mode.
Technical Information
***: 0x0000000A (0x6392cc8c, 0x00000002, 0x00000000, 0x804EC9AD)
Begining dump of physical memory.

пожалуста объясниче, что это такое значит и как решить эту проблему, заранее спасибо!

Daniil
08.12.2006, 14:12
Disable BIOS mempry to use safe mode to remove or disable components, restart your computer, press F8 to select Advaced Startup Options, and then select Safe mode.Или память проверь.

Sancho_1990
08.12.2006, 14:22
]Disable BIOS mempry to use safe mode to remove or disable components, restart your computer, press F8 to select Advaced Startup Options, and then select Safe mode.

Думаете я знаю че эт значит?? =)

Daniil
08.12.2006, 14:36
Первоначальное сообщение от Sancho_1990
]Disable BIOS mempry to use safe mode to remove or disable components, restart your computer, press F8 to select Advaced Startup Options, and then select Safe mode.

Думаете я знаю че эт значит?? =)

Перезагрузись-придерживай клавишу F8-входи в систему под Safe Mode.Не получиться,тогда греши на память.

Sancho_1990
08.12.2006, 16:21
в Безопасный режим заходит...

Daniil
09.12.2006, 05:03
Первоначальное сообщение от Sancho_1990
в Безопасный режим заходит...

Тогда проверь,правильно ли установлены проги и дрова в диспетчере устройств.