Modifications for Less Than 3 Dollars
Three components must be added to the Asus A7V to enable the multiplier settings according to the adjustments printed on the circuit board. A listing of the necessary components is shown in the table below.
|Component Name||Type||Position on the board||Price|
|DIP Switch||6 DIP||adjacent to first DIP||$1.50|
|Logic IC (SMD)||74F125||U42||$0.80|
|SMD Resistor||8-pin, 100 Ohm||R16||$0.70|
The next picture shows what the individual components look like. The DIP block is available from most mail-order stores for electronic components. Getting your hands on the two SMD components might be a little more difficult: they should be available in stores specializing in electronics that usually offer a large variety of SMD components.