System Block Diagram
Partition The System Into Separate PCBs
Both the reduction in size and the ability upgrade/exchange separate parts of the system are advantages of dividing the system into separate PCBs. The system block diagram gives a good indication of how this should be done. A PC would be divided into main board, graphic card, sound card, floppy drive, power supply, etc.
Determine The Technology To Be Used And The Size Of Each PCBs
When the technology and amount of circuitry on each PCB is determined, the board size must be estimated. If space limitations apply and it turns out that a PCB will be too large, the technology must be changed or the partitioning must be redone. When choosing the technology the quality and speed of the circuit must also be considered.
Schematic Of The Circuitry On All PCBs
A schematic is a detailed drawing of all connections between the components in a circuit. This must be done for all PCBs in the system, and is nowadays done using Computer Aided Design (CAD). Below is an example of a schematic that was made using
Simulating The Design
To make sure the designed circuit work properly it must be simulated with a computer program. Such programs take the schematic as input, and can than display the operation of the circuit in numerous ways. This is much more efficient than building a prototype on a breadboard and doing the measurements manually.