РЕКЛАМА
ИНФОРМАЦИЯ
ПОЛЕЗНЫЕ ССЫЛКИ
A Real Nail-Biter: Four Boards With ALi Magik 1

There's No Stopping Them: SiS Beats AMD & Co

VIA Apollo KT266 Revisited - Much Ado About Nothing

The Three Musketeers - Athlon Platforms For 133 MHz FSB

Athlon Boosters - Three AMD 760 Boards for DDR SDRAM

It's Time For DDR: 3 New 760 Athlon Mobos

Can't Touch This! - A Comparison of 46 CPU Coolers

Rambler's Top100 Рейтинг@Mail.ru

МАТПЛАТЫ

Only the Best: 9 Athlon Motherboards With The AMD 760 Chipset
Краткое содержание статьи: Our previous AMD 760 reviews were written by different editors, each with their own test setups at various labs, so it might have been a bit difficult for some of you to get an overview of all boards. For this second update, we not only took the time to retest all candidates using the same test conditions, but we also spent qsome time on performance tuning and extra analyses.

Only the Best: 9 Athlon Motherboards With The AMD 760 Chipset


Редакция THG,  6 августа 2001
Назад
Вы читаете страницу 5 из 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Далее


IDE RAID Advancing

Additional IDE controllers with RAID functionality are gaining popularity. Unlike SCSI, RAID devices do not boost costs but still provide a great extra value. There are three IDE RAID chips available now: Highpoint's HPT370A, Promise FastTrak100 Lite (PDC20265) and AMI MG80649. Integrated onto a motherboard, they do not require a PCI slot and offer two additional IDE ports for two devices each.

IDE RAID Advancing

IDE RAID Advancing

All chips support five different modes:

  • Standard IDE Controller
    You may attach up to 4 additional devices (2 at each port)
  • Disk Spanning
    The controller chip creates one single volume out of all hard drives attached. The capacity of small hard drives can be combined by this feature
  • Striping (RAID 0)
    That's the most interesting mode for many users: After attaching two or four IDE hard drives to the RAID controller, it will create one volume out of them. Data is written and read on alternating drives, resulting in a drastic increased data transfer rate. Using drives of different capacities is not recommended, though the array would work.
  • Mirroring (RAID 1)
    This feature is very useful for data safety. It requires two or four hard drives. Data is always written simultaneously onto two drives. If one of those drives fails, you will still have the latest data backed up on the second drive. That will only work with drives of the same capacity.
  • Mirroring + Striping (RAID 0+1)
    This mode requires four drives. Two of them will be striped while this will be mirrored onto the remaining two disks. Only works with drives that have the same capacity.
Назад
Вы читаете страницу 5 из 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Далее


СОДЕРЖАНИЕ

Обсуждение в Клубе Экспертов THG Обсуждение в Клубе Экспертов THG


РЕКЛАМА
РЕКОМЕНДУЕМ ПРОЧЕСТЬ!

История мейнфреймов: от Harvard Mark I до System z10 EC
Верите вы или нет, но были времена, когда компьютеры занимали целые комнаты. Сегодня вы работаете за небольшим персональным компьютером, но когда-то о таком можно было только мечтать. Предлагаем окунуться в историю и познакомиться с самыми знаковыми мейнфреймами за последние десятилетия.

Пятнадцать процессоров Intel x86, вошедших в историю
Компания Intel выпустила за годы существования немало процессоров x86, начиная с эпохи расцвета ПК, но не все из них оставили незабываемый след в истории. В нашей первой статье цикла мы рассмотрим пятнадцать наиболее любопытных и памятных процессоров Intel, от 8086 до Core 2 Duo.

ССЫЛКИ